MC SERIES SNOWPLOW


Big trucks and big jobs require serious snowplowing equipment.  The FISHER® MC Series is the biggest toughest plow Fisher makes.  Built for municipal and contractor vehicles in the 17,000-27,500 GVW range, the MC Series is just right for narrow streets and intersections and large parking lots.  Matching the plow to the job – that’s how to get it done!

 

 

FEATURES AND BENEFITS OF THE FISHER MC SERIES:

 

  • BIG MOLDBOARD

Available in 9’ and 10’ blade widths, the MC Series snowplow is a full 34” high and made from 11 gauge steel.

 

  • HEAVY DUTY FEATURES

The 9’ blade features two wear-resistant cast iron shoes and four compression type trip springs.

The 10’ blade has four cast-iron shoes, and six compression type trip springs.

Eight vertical ribs provide structural reinforcement.

An 8” center punched reversible cutting edge is standard on both sizes. The cutting edge increases wear resistance and improves cutting power and scraping ability.

 

  • FAST AND DURABLE HYDRAULICS

Instead of relying on outside suppliers, Fisher builds all hydraulics themselves, for unmatched speed and durability. Fast responsive hydraulics maximize snowplowing efficiency. 

 

  • CHAIN LIFT SYSTEM

With the chain lift system, you get instantaneous “float” when lowering the blade. Unrestricted, the blade can freely follow the contours of the plowing surface for a cleaner scrape.

With the chain lift you can stack higher because you’re not limited by the hydraulic ram stroke, unlike cylinder lift systems, which can only pull the plow up as far as the limits of the cylinder’s range.

In the rare event of a hydraulic failure, you can push the plow up into a snow bank and “short chain” the plow by attaching it to the specially designed bracket and safely transport the plow back to the shop.

 

  • TRIP-EDGE DESIGN

Only the edge of the blade trips when an obstacle is encountered. It’s much less jarring than a full-trip blade, and because the blade stays upright, plowed snow remains in front of the blade. Fisher Engineering’s trip edge uses compression-type springs. They never need adjusting and are never stretched like extension springs, providing the longest life of any type of spring on the market.

 

  • IN-CAB CONTROLS

Hand-held control with backlit directional buttons provides precise response. Choose between the convenient hand-held Fish-Stik® control with power “on” and “float” LED and automatic shut-off, or the compact joystick control.

 

  • MINUTE MOUNT 2 SYSTEM

100% mechanical design means there are no electrical components or hydraulic assist gimmicks to fail.

The attachment arms and lower gear are flared both vertically and horizontally to make the drive-in connection easy.

 

  • INTENSIFIRE LIGHT

The  reflector optics provide a smooth wide beam pattern that illuminates the entire plowing surface, with minimal glare above the lamp, especially during snowfall.

1,500 hour, H I 3, long-life headlamp bulb minimizes bulb replacement over the life of the lamp.

Three-screw bulb access cover attachment and twist-in headlamp bulb makes replacement quick and easy.

Lens is adhesive bonded to the reflector and the reflector is adhesive bonded to the housing, sealing out water that could potentially freeze and damage the assembly.

Robust, two-stud mounting keeps the lamp in its original mounting position – even when subjected to the harshest shock and vibration forces.

 

  • STORM GUARD POWDER COAT

With the STORM GUARD powder coating process, the automated climate-controlled powder booth ensures uniform coverage to all surfaces. Fisher has added a new epoxy primer to further enhance powder coat adhesion and improve corrosion resistance.

 

Monroe Truck and Auto Accessories is proud to serve as your West Michigan dealer for Fisher Snowplows, accessories and replacement parts. Please contact the knowledgable and experienced staff at Monroe's with any questions or for help in deciding which Fisher Plow is right for you. We can repair or install your Fisher Plow in our full service garage, and we carry a wide range of replacement parts in-store so you can get in, get out, and get it done. Contact Monroe's at (231)773-0005.