HD SERIES


When the pros are looking for a straight blade with real earning power, they turn to the rugged FISHER® HD Series more than any other snowplow in the FISHER line.  With 7 ½’, 8’, 8 ½’ and 9’ options, there’s a tough HD ready to meet the demands of even your most punishing commercial applications.

 

FEATURES AND BENEFITS OF THE FISHER HD SERIES SNOWPLOW:

 

  • MOLDBOARD

Designed for ½-, ¾- and 1-ton four-wheel drive trucks, as well as today’s 15,000 GVW Super Duty vehicles, these snowplow blades are 29” high and built with the heavy 11 gauge steel (12 gauge steel for the 7 ½' blade). Available in 7 ½’, 8’, 8 ½’ and 9’  widths. The full base angle does not require a cutting edge, allowing for more wear. Eight vertical ribs provide superior moldboard reinforcement.

 

  • CHAIN LIFT SYSTEM

With the chain lift system, you get instantaneous “float” when lowering the blade. Unrestricted, the blade can freely follow the contours of the plowing surface for a cleaner scrape. With the chain lift you can stack higher because you’re not limited by the hydraulic ram stroke, unlike cylinder lift systems, which can only pull the plow up as far as the limits of the cylinder’s range. In the rare event of a hydraulic failure, you can push the plow up into a snow bank and “short chain” the plow by attaching it to the specially designed bracket and safely transport the plow back to the shop.

 

  • FAST AND DURABLE HYDRAULICS

Fast responsive hydraulics maximize snowplowing efficiency. 

 

  • TRIP-EDGE DESIGN

 Only the edge of the blade trips when an obstacle is encountered. It’s much less jarring than a full-trip blade, and because the blade stays upright, plowed snow remains in front of the blade. Fisher Engineering’s trip edge uses compression-type springs. They never need adjusting and are never stretched like extension springs, providing the longest life of any type of spring on the market.

 

  • MINUTE MOUNT 2 SYSTEM

 100% mechanical design means there are no electrical components or hydraulic assist gimmicks to fail.The attachment arms and lower gear are flared both vertically and horizontally to make the drive-in connection easy.

 

 

  • IN-CAB CONTROLS

Hand-held control with backlit directional buttons provides precise response. Choose between the convenient hand-held Fish-Stik® control with power “on” and “float” LED and automatic shut-off, or the compact joystick control.

 

  • INTENSIFIRE LIGHTS

The state-of-the-art reflector optics provide a smooth wide beam pattern that illuminates the entire plowing surface, with minimal glare above the lamp, especially during snowfall. 1,500 hour, H I 3, long-life headlamp bulb minimizes bulb replacement over the life of the lamp. Three-screw bulb access cover attachment and twist-in headlamp bulb makes replacement quick and easy. Lens is adhesive bonded to the reflector and the reflector is adhesive bonded to the housing, sealing out water that could potentially freeze and damage the assembly. Robust, two-stud mounting keeps the lamp in its original mounting position – even when subjected to the harshest shock and vibration forces.

 

  • STORM GUARD POWDER COAT

With the STORM GUARD powder coating process, the automated climate-controlled powder booth ensures uniform coverage to all surfaces. Fisher has added a new epoxy primer to further enhance powder coat adhesion and improve corrosion resistance. Plus the trademark FISHER®  yellow finish is reformulated to maintain that new snowplow look even longer.

 

Monroe Truck and Auto Accessories is proud to serve as your West Michigan dealer for Fisher Snowplows, accessories and replacement parts. Please contact the knowledgable and experienced staffat Monroe's with any questions or for help in deciding which Fisher Plow is right for you. We can repair or install your Fisher Plow in our full service garage, and we carry a wide range of replacement parts in-store so you can get in, get out, and get it done. Contact Monroe's at (231)773-0005.